Proper irrigation sprinkler installation can create the garden and lawn of your dreams. A good irrigation sprinkler system makes sure that your plants all get consistent water. However, to properly install a sprinkler irrigation system, a good bit of planning and attention to detail are required. Today, we’re going to talk about some of the best irrigation sprinkler installation tips and tricks for success.
1. Plan for the Sprinkler Irrigation System
Before any kind of installation takes place, you need to assess the various needs of your garden and lawn in terms of watering requirements. Different areas of your garden and lawn will vary in terms of how much water they need.
Knowing how much water different areas of your garden require will allow you to install the system in a way that provides those areas with adequate moisture, while preserving water in other areas.
On that note, you’ll also want to measure the total width and length of your yard to determine what the overall irrigation needs are.
Before you can get started with designing the irrigation system, you need to check the flow rate and water pressure of your connection point. You can use a pressure gauge to measure both the flow rate and water pressure by timing how long it takes to fill a certain volume.
Knowing what the flow rate and water pressure are that you have at your disposal will allow you to choose the best possible option.
2. Designing The Sprinkler Irrigation System
To easily visualize what this sprinkler irrigation system will look like, sketch out the area that you need to cover, and then note where each sprinkler head should be located.
This kind of visual approach will allow you to ensure that all necessary areas are covered. A good idea is to use overlapping spray patterns, as this will help prevent dry spots from occurring.
Choosing the right sprinkler heads is very important as well. There are drip irrigation, rotary, spray, and other types of sprinklers. It is recommended that you do some research to determine which type of sprinkler head is best for your area.
Finally, when you are designing the sprinkler irrigation system, make sure to divide your lawn and garden into various zones depending on water needs. This way, you can have a separate valve and timer for each zone, therefore allowing for a customized watering schedule.
3. Tips for Irrigation Sprinkler System Installation
When you’re digging your trenches for the irrigation pipes, keep in mind that there may be tree roots and utility lines under the ground. Therefore, you should always contact your local utility company so you know where those underground lines are. When digging trenches for the pipes, make them at least 6 inches deep, as this will help protect them from freezing and damage.
On the note of the pipes and other components of the irrigation system, make sure that you choose high-quality materials. Cheap components will likely break quickly and not function properly, often right from the beginning.
When you are assembling the components, make sure that you follow the manufacturer’s instructions, and make sure that all fittings are securely connected.
Using Teflon tape on all threaded connections helps ensure a good seal. You may also want to install a backflow preventer, as this will prevent any kind of contamination of your drinking water.
If this all sounds like a little too much, and you need some help, click here to find some of the best options for landscaping near me!